manualshive.com logo in svg

Minolta CF5001, User Manual, Page: 388 / 432

Share
Download
Minolta CF5001 User Manual Download Page 388

14-24

[7] Panel Contrast / Key Sound Adjustment

Use this feature to adjust the level of brightness of the touch screen portion of the
control panel, and also the volume of the touch key.

NOTE:

The control panel contrast feature can be adjusted from the Help screen.

Procedure

1

Touch 

[7] Panel contrast/Key sound adj.

 to display the Panel Contrast / Key

Sound Adjustment Screen.

2

Adjust the Backlight contrast or Buzzer volume, as desired.
Touch the Dimmer arrow key to make the backlight contrast dimmer than currently
displayed, or touch the Brighter arrow key to make the panel or backlight contrast
brighter than currently displayed.
Touch the Small or Big arrow key to regulate the buzzer volume of the touch keys.

3

Touch 

OK

 to complete the setting and return to the Key Operator Mode Screen.

Key Operator Mode Screen

Panel Contrast / Key Sound Adjustment Screen

Summary of Contents for CF5001

















































































































































































































































































































































































































































Reviews:

No comments