manualshive.com logo in svg

Minolta CF5001, User Manual, Page: 194 / 432

Share
Download
Minolta CF5001 User Manual Download Page 194

7-34

Specifying Original Type (Original Image/Type in Special Original)

The image quality or type of the original may affect the copy result.
Use Original Image to improve the image quality by specifying the original image
type as follows.

• Originals including both text and photo (TEXT/PHOTO)
• Photo originals or originals mainly composed of photos (PHOTO)
• Text originals (TEXT)
• Coloured original with small text such as a map (MAP)

Use Original Type to improve the image quality by specifying the printed original
type.
• Normal original (PRINTED)
• Photo-printed original (PHOTO PAPER)
• Copied original (COPIED PAPER)
• Original printed using Ink-jet printer (INKJET PAPER)

1.

Touch 

SPECIAL ORIGINAL

 on the Basic Screen.

The Special Original popup menu will be displayed.

2.

Touch the desired key in ORIG. IMAGE area and ORIG. TYPE area.

Only one selection can be made in each area.

In each ORIG. IMAGE mode, the copy density level can be shifted three levels
darker or three levels lighter (Density Shift). See p. 7-17 for details.

Summary of Contents for CF5001

















































































































































































































































































































































































































































Reviews:

No comments