manualshive.com logo in svg

Minolta CF5001, User Manual, Page: 189 / 432

Share
Download
Minolta CF5001 User Manual Download Page 189

7-29

Adjusting Sharpness and Contrast / Selecting Gloss Mode

In addition to the colour adjustment and reproducing method selection, this machine
allows you to apply the following filters to improve the copy image quality.

Sharpen the outline of the image. (Sharpness)
Increase the contrast of the image. (Contrast)
Increase shine on the image. (Gloss Mode)

Follow the procedure below to make the adjustment.

See p. 7-13 to p. 7-14 for details of the Sharpness, Contrast, and Gloss mode.

1.

Touch 

IMAGE ADJUST

 on the Basic Screen.

2.

Touch 

OTHERS

 to display the Other Adjustment Screen.

Summary of Contents for CF5001

















































































































































































































































































































































































































































Reviews:

No comments