Mindray PM-9000, Operation Manual

Page: 311 / 378

Anesthesia Gas Monitoring
18-7
„ SWEEP Used to select the speed to scan the screen waveforms.
Options: 6.25mm/s and 12.5mm/s.
„ WORK MODE Options: MEASURE and STANDBY.
To monitor the anesthetic gas, select the MEASURE option. Otherwise, select the
STANDBY option.
Alarm Setup Menu
Select ALARM SETUP >> in AG SETUP menu. The following menu appears.
Figure 18-5 Alarm Setup Menu
In the ALARM SETUP menu-1, you can set the following items.
„ ALM Alarm on/off status
ON: When the AG has an alarm, the system will give alarm
indications and save the alarm information.
OFF: The system will not give alarm indications when an
AG alarm occurs. Instead it will display
on the right of
the GAS label in the parameter window.
„ ALM LEV Options: HIGH, MED and LOW.
„ ALM REC ON: The recorder outputs the alarm information in case an
AG alarm occurs.
OFF: The recorder does not output the alarm information in
case an AG alarm occurs.
„ EtCO2 ALM HI Set the upper limit of EtCO
2
which triggers the alarm