Mindray PM-9000, Operation Manual

Page: 182 / 378

ECG/RESP Monitoring
11-46
For different patient types, the upper/lower limits of the respiration rate alarm may
vary in the following range.
Patient type Max. ALM HI Min. ALM LO
Increment
Adult 120 0 1
Neonate/pediatric 150 0 1
„ APNEA ALM Apnea alarm
Determines whether the patient’s cessation of breath is an
apnea event. Range: 10
–
40 seconds.
„ SWEEP Waveform speed
Options: 6.25, 12.5 and 25.0 mm/s.
„ HOLD TYPE Calculation type
Options: AUTO and MANUAL
1. AUTO: When AUTO is selected, the monitor automatically determines the
detection threshold for respiration and calculates the respiration rate. The
HOLD HI and HOLD LO options are inactive.
2. MANUAL: When MANUAL is selected, the user determines the detection
threshold for respiration and the monitor calculates the respiration rate
depending on the user-selected criteria.
„ DEFAULT >> Select DEFAULT >> to access the RESP DEFAULT
CONFIG menu. You can select either FACTORY
DEFAULT CONF or USER DEFAULT CONF. After
finishing the selection and exiting the menu, a dialog pops up
asking for confirmation of your selection.