The Basics
2-12
2.4
Display
This monitor has a color TFT LCD display of high resolution. It is able to display
patient parameters and waveforms clearly. The following is the standard interface
when the monitor is operating normally.
Figure 2-6 Main Screen
1. Patient information area
It displays patient bed number and patient type. If no patient is admitted, it displays
“NO PATIENT ADMITTED”. If the patient’s information is incomplete,
corresponding symbols
will be displayed.
2. System
time
The system time of the monitor is displayed in two lines. The time format can be set
in the TIME SETUP menu. For details, see
4.4.3 Time Setup
.
3. Technical
alarms
area
Technical alarm messages or prompt information are displayed in this area. In case
of multiple messages, they will be displayed alternately. This area shows the patient
3
1 2
4
5
6
7
8 9
Summary of Contents for PM-9000
