Mindray PM-9000, Operation Manual

Page: 232 / 378

TEMP Monitoring
14-4
14.3 TEMP Setup Menu
Selecting the TEMP label in the parameter window opens the following menu.
Figure 14-2 TEMP Setup Menu
You can perform the following settings in this menu.
„ ALM Temperature alarm on/off status
ON: When a temperature alarm occurs, the monitor gives
alarm indications and stores the alarm;
OFF: When a temperature alarm occurs, the monitor neither
gives alarm indications nor stores the alarm;
When OFF is selected, the
icon is displayed on the right
of the TEMP label.
„ ALM LEV Alarm level
Options: HIGH, MED and LOW.
„
ALM REC Alarm recording
ON: When a TEMP alarm occurs, the monitor enables the
recording;
OFF: When a TEMP alarm occurs, the monitor does not
enable the recording.
„ T1 ALM HI
Determines the upper alarm limit of temperature channel 1.
„ T1 ALM LO Determines the lower alarm limit of temperature channel 1.
„ T2 ALM HI Determines the upper alarm limit of temperature channel 2.
„
T2 ALM LO Determines the lower alarm limit of temperature channel 2.