Mindray ePM 10M, Operator'S Manual

Page: 54 / 364

4 - 4
4.4.5 Setting the Minitrend Length
To set the Minitrend length, follow this procedure:
1. Enter the Minitrends screen.
2. Select the
Setup
button.
3. Set the
Minitrend Length
.
4.4.6 Setting the Alarm Statistics Switch
The Minitrends screen can be configured to display the statistic number of physiological alarms in its lower half
screen. To set the alarm statistics switch, follow this procedure:
1. Enter the Minitrends screen.
2. Select the
Setup
button.
3. Switch on or off the
Alarm Statistics
switch.
4.4.7 Setting the Alarm Statistics Duration
The time length within which the alarms statistics are made is configurable. To set the alarm statistics length,
follow this procedure:
1. Enter the Minitrends screen.
2. Select the
Setup
button.
3. Set
Alarm Statistics Duration
.
4.4.8 Routine Vital/Baseline
The Routine vital/Baseline function is used for marking the parameter measurements of certain moment for later
reference. If the department is set to
OR
, then the
Baseline
button is available. For other departments, the
Routine Vital
button is available.
4.4.8.1 Manually Marking the Routine Vital/Baseline
To manually mark the Routine Vital/Baseline, follow this procedure:
1. Enter the Minitrends screen.
2. Select the
Routine Vital
button or
Baseline
button.
NOTE
•
If you do not see the Baseline button or Routine Vital button in the Minitrends screen, you can select
the Setup button and switch on the Baseline switch, or set the Routine Vital to Manual or Auto.
4.4.8.2 Configuring Automatic Routine Vital Settings
The monitor can automatically mark the routine vital sign values. To enable this function, follow this procedure:
1. Enter the Minitrends screen.
2. Select the
Setup
button.
3. Select
Auto
from the dropdown list of
Routine Vital
.
4. Select
Time
to set the time for marking the first routine vital sign values.
5. Select
Interval
to set the interval for marking the routine vital sign values.