Mindray ePM 10M, Operator'S Manual

Page: 64 / 364

6 - 2
6.4 Setting Default Configuration
The monitor will load the pre-set default configuration in the following cases:
■
A patient is admitted.
■
A patient is discharged.
■
Patient data is cleared.
■
Patient category is changed.
To set the default configuration, follow this procedure:
1. Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select .
2. Select
Select Default Config
.
3. Select
Load the Latest Config
or
Load Specified Config
.
◆
When you select
Load Specified Config
, the restored configuration is subject to the patient category
(adult, pediatric or neonate). This configuration can be either factory configuration or a saved user
configuration. As an example, select
Default Ped Config
and then select
Factory Default
or user
configuration(s).
◆
When you select
Load the Latest Config
, the latest configuration is loaded when the monitor is
started or a patient is admitted.
6.5 Saving Current Settings
Current settings can be saved as a user configuration. Up to 25 user configurations can be saved.
To save current settings, follow this procedure:
1. Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select .
2. Select
Save Current Settings
.
3. Input the configuration name.
4. Select
OK
to save current settings as a user configuration.
6.6 Deleting a Configuration
To delete a configuration, follow this procedure:
1. Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select .
2. Select
Delete Configuration
.
3. Select the configuration you want to delete:
◆
In the
Delete Configuration
menu, selecting
Local
tab shows the existing user configurations on the
monitor.
◆
In the
Delete Configuration
menu, selecting
USB Drive
tab shows the existing user configurations
on the USB drive.
4. Select
Delete
.
5. Select
OK
.