Mindray ePM 10M, Operator'S Manual

Page: 60 / 364

5 - 2
WARNING
•
The settings of patient category and paced status always contain a default value, regardless of
whether the patient is admitted or not. Check if the setting is correct for your patient.
•
For paced patients, you must set Paced to Yes. If it is incorrectly set to No, the monitor could mistake
a pace pulse for a QRS and fail to alarm when the ECG signal is too weak.
•
For non-paced patients, you must set Paced to No.
5.3 Managing Patient Information
5.3.1 Entering the Patient Management Menu
Use any of the following methods to enter the
Patient Management
menu:
■ Select the patient information area at the top left corner of the screen.
■ Select the
Patient Management
quick key.
■ Select the
Main Menu
quick key
→
from the
Patient Management
column select
Patient Management
.
5.3.2 Editing Patient Information
Edit patient information after a patient has been admitted, or when patient information is incomplete, or when
you want to change patient information:
To edit patient information, follow this procedure:
1. Enter the
Patient Management
menu. For more information, see 5.3.1 Entering the Patient Management
Menu .
2. Edit patient information as required.
If you connect a barcode reader with your monitor, you can scan the patient’s barcode to enter patient
information.
NOTE
•
The monitor will reload the configuration if you change the patient category.
5.3.3 Loading Patient Information from the CMS
If the monitor is connected to the central monitoring system (CMS). You can load patient information from the
CMS to the monitor. To do so, follow this procedure:
1. Enter the
Find Patient
menu in either of the following ways:
◆
Select the
Main Menu
quick key
→
from the
Patient Management
column select
Find Patient
.
◆
From the
Patient Management
menu select
Find Patient
.
2. Input query criteria. If your monitor is connected with the ADT server, input query criteria from the
Discharged Patients
page.
3. Select
Search
. Then a list pops up, including all the patients that meet the query criteria.
4. Select a patient from the patient list, and then select
Import
. Corresponding patient information in the
monitor will be updated.