Mindray ePM 10M, Operator'S Manual

Page: 44 / 364

3 - 10
3.6.3.2 Configuring the Displayed Quick Keys
To select the quick keys you want to display, follow this procedure:
1. Access
Quick Keys
in either of the following ways:
◆
Select the
Screen Setup
quick key
→
the
Select Quick Keys
tab.
◆
Select the
Main Menu
quick key
→
from the
Display
column select
Quick Keys
.
2. Select the
Current
tab to configure the quick keys you want to display on the screen: From the top of this
page, select a block where you want to show a certain quick key, and then select the quick key from the
quick key list. For example, if you want to show the
Screen Setup
quick key at the first block, select the first
block, and then select
Screen Setup
from the list.
3. Select the
More
tab to configure the quick keys you want to display when the
More
quick key is selected.
3.7 Operating Modes
The monitor provides different operating modes. This section describes the monitoring mode and the standby
mode.
3.7.1 Monitoring Mode
The monitoring mode is the most frequently used clinical mode for patient monitoring. When the monitor is
turned on, it automatically enters the monitoring mode.
End Case
Report Prints the selected end
case reports. Intubation
Mode Enters the intubation
mode.
Volume Enters the
Volume
menu. Freeze Freezes waveforms.
Calculations Enters the
Calculations
menu.
Load Config Enters the
Load Config
menu.
Print Starts printing a real-time
report. Record Starts/Stops a recording.
ECG 24h Sum Views the 24-hour ECG
summary. ECG Lead/Gain Enters the
ECG Lead/
Gain
menu.
Integrated
Devices Enters the
Integrated
Devices
screen.
Call Help Calls for help.
Discharge
Patient Enters the
Discharge
Patient
dialog box.
Discharged
Patients Enters the
Discharged
Patients
dialog box.
CPB Mode Enters the CPB mode. Targeted Goal Opens the Targeted Goal
screen.
Symbol Label Function Symbol Label Function