Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference Download

Page: 54 / 869

MERLIN LEGEND Communications System Release 5.0
Feature Reference

555-650-110

Issue 1

June 1997

Features

Page 22

Index to Features by Activity

System Manager Features

For

Feature Name

Directories

Change a user’s Personal Directory listings.

MLX display

phones only

Labeling

(p. 360)

Change the Extension Directory to accommodate new

or changed extensions.

N/A

Labeling

(p. 360)

Change the names listed with System Directory

entries to accommodate business needs.

N/A

Labeling

(p. 360)

Getting reports

Get a report on incoming and outgoing calls, including

account codes, if programmed.

N/A

Station Message Detail

Recording

(p. 557)

Get a report on the way the system is programmed.

N/A

Station Message Detail

Recording

(p. 557)

Lines and trunks

Take an outside line out of service when there is a

problem with it.

N/A

Automatic Maintenance Busy

(p. 62)

In Hybrid/PBX mode, assign lines that can be

answered without operator involvement.

All telephones

Personal Lines

(p. 421)

In Behind Switch mode, allow Conference, Transfer,

and Drop buttons to access host features.

N/A

Recall/Timed Flash

(p. 511)

Messages

Change the language used (English, French, or

Spanish) systemwide or at an extension; this also
changes the clock, which is 12-hour for English and
24-hour for French or Spanish.

MLX display

phones only

Language

(p. 364)

Change the posted messages that users can choose

from.

N/A

Labeling

(p. 360)

Change the extension information that appears on

display telephones with inside calls and messages.

N/A

Labeling

(p. 360)

Operators

Allow a QCC operator to join callers and extensions

more rapidly.

N/A

Queued Call Console

(p. 488)

Find out about the Alarm button on operator consoles

or set up a special light or bell to signal a system
problem.

Operator

consoles

Alarm

(p. 30)

Set up a group of fax machines to take calls.

N/A

Group Calling

(p. 281)

Set up voice messaging system to take calls.

N/A

Group Calling

(p. 281)

Prevent DLC operators from accidentally

disconnecting callers.

N/A

Hold

(p. 312)

Direct-Line Console

(p. 191)

Find out what to do when callers on hold are being

disconnected.

N/A

Hold

(p. 312)

Summary of Contents for MERLIN LEGEND Release 5.0






































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MERLIN LEGEND Release 5.0

Reviews:

Related manuals for MERLIN LEGEND Release 5.0

Brands by name

Popular brands

Lucent Technologies MERLIN LEGEND Release 5.0, Feature Reference

Search results

Summary of Contents for MERLIN LEGEND Release 5.0

Reviews:

Related manuals for MERLIN LEGEND Release 5.0

Brands by name

Popular brands