MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 547
Signal/Notify
Signal/Notify
3
9
At a Glance
3
9
Description
3
9
A user can signal another telephone user without making a call to that extension,
using either the Signal feature, which beeps the destination extension, or the
Notify feature, which lights an LED on the destination extension. The meaning of
the signal can be prearranged between the sending and receiving users.
Signal
3
9
The Signal feature allows a multiline telephone user to beep another telephone.
To use the feature, press a programmed Signal button without lifting the handset.
A beep is heard at the destination extension for as long as the sender holds the
button down.
In addition to sending a beep, the Signal button can be used to see the status of
the destination extension. When the destination user lifts the handset or uses Do
Not Disturb, the green LED next to the Signal button turns on.
A user also can use the Signal button to dial the destination automatically.
However, the user must select an SA or ICOM button and either lift the handset or
press the Speaker button before using the Signal button; this is different from
Auto Dial, which automatically selects a line and activates the speakerphone.
Notify
3
9
Notify allows a multiline telephone user to light an LED on another telephone. To
use this feature, a Send button must be programmed at the sender’s telephone
and a Receive button must be programmed at the receiver’s telephone. These
Users Affected
Telephone users, operators
Reports Affected
Extension information
Modes
All
Telephones
All except QCC and single-line telephones
Programming Codes
Signal
Notify, Send
Notify, Receive
*23
+
ext. no.
*757
+
ext. no.
*758
+
ext. no.
MLX Display Labels
Signal
Notify, Send
Notify, Receive
Signal [Signl]
Notify,Send [Ntfy,Send]
Notify,Receive [Ntfy,Recv]
