MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 251
Do Not Disturb
Do Not Disturb
1
9
At a Glance
1
9
Description
1
9
Do Not Disturb prevents calls from ringing and prevents paging over a
speakerphone. When you turn on the feature and receive an outside call, the
caller hears ringback, but your telephone does not ring. The green LED next to the
line button with the ringing call flashes to indicate an incoming call, and, if you
choose, you can answer the call. If the feature is turned on and you receive an
inside call, the inside caller hears a busy signal. The telephone does not ring, and
the green LED next to an SA or ICOM button does not flash.
The types of priority listed below calls override Do Not Disturb and cause the
telephone to ring; the green LED also flashes.
■
A call (including a transferred call) from any coverage receiver to a sender
with Do Not Disturb on
■
A Barge-In call
■
A returning transferred or camped-on call, or a parked call returning to a
Direct-Line Console (DLC) operator
■
A callback call, notifying you that a call to a busy extension or to a busy
pool (Hybrid/PBX mode only) can be completed
■
A Reminder call
■
In Release 2.0 and later systems, when a user turns on the feature, the
system automatically posts the message
DO NOT DISTURB
. Users with
analog multiline telephones, MLX-10, or MLX-5 nondisplay telephones
must program a Posted Message button in order to display the message
for callers. This message appears on the Home screen of an MLX display
telephone with Do Not Disturb turned on, and on the screen of any inside
caller with a display telephone who calls. When you turn off Do Not Disturb,
the system automatically removes the message. You can also post and
remove the message by using a programmed Posted Messages button.
However, using this button only posts or removes the message; it does not
turn on or turn off the Do Not Disturb feature.
Users Affected
Telephone users, DLC operators
Reports Affected
Extension Information
Modes
All
Telephones
All except QCC and single-line telephones
Programming Code
*47
MLX Display Label
DO NOT DISTURB [DND]
