MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 327
Inspect
Direct Station
Selector
Inspect can display limited information, such as extension number, label,
and number of messages, for each DSS button. To use Inspect, an
operator presses the Page button for the range of extensions, then the
Inspct button, then the DSS button for an extension. Inspect must be
activated separately for each page on the DSS; to inspect another page,
an operator presses the Home button and repeats the process.
When an operator inspects a DSS button associated with an extension,
Line 1 of the display shows the extension, the label associated with the
extension, if any, and the number of messages that have been left for that
extension, if any. It the extension has posted a message, Line 2 shows
the posted message.
In Release 2.0 and later systems, an operator can inspect a DSS button
with a red LED on to see whether the extension is busy or using Do Not
Disturb. If the user at the extension has turned on Do Not Disturb, the Do
Not Disturb message is also posted and appears on the operator’s
display. However, the message may also mean that the user has posted
the message without turning on the Do Not Disturb feature.
Drop
If a user presses the Drop button while active on a call with Inspect
activated, Inspect is canceled and the system attempts to activate the
Drop feature.
Group Calling
Any MLX telephone user can inspect the number of calls in the calling
group queue by pressing the Inspct button and then pressing a button
programmed with the calling group’s extension, the Calls-in-Queue Alarm
button. The display shows the label associated with the calling group and
the number of calls in the queue.
Hold
If a user presses the Hold button while active on a call with Inspect
activated, Inspect is canceled and the system tries to put the call on hold.
Last Number Dial
Starting with Release 2.0, if a programmed Last Number Dial button is
inspected, the display shows the last number stored for dialing. If no
number is stored, the feature name is displayed.
Paging
If a user gets a voice-announced inside call or a group speakerphone
page while using the Inspect feature, the Inspect feature is canceled and
the user is returned to the Home screen.
Saved Number Dial
Starting with Release 2.0, if a programmed Saved Number Dial button is
inspected, the display shows the last number stored for dialing. If no
number is stored, the feature name is displayed.
Transfer
If a user with Inspect activated tries to transfer a call by pressing the
Transfer button while active on a call, Inspect is canceled and the user is
returned to the Home screen.
