MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 553
Speed Dial
Mode Differences
3
9
Hybrid/PBX Mode
3
9
A pool dial-out code or an Idle Line Preference access code can be included with
the telephone number in a Personal Speed Dial or System Speed Dial code. To
allow time to receive a local telephone company dial tone, Pause characters may
be required immediately following either a pool dial-out code or an access code
for a long-distance carrier. Pauses are not needed following the ARS code.
When ARS is used, the pound sign (
#
) should be pressed twice after the dialed
digits during programming of a Personal Speed Dial or System Speed Dial code
for a 7-digit toll number. This signals the end of the dialing sequence. See
Appendix H, “Programming Special Characters,” for information about special
characters.
Behind Switch Mode
3
9
The user can program into Personal Speed Dial or System Speed Dial codes any
dial-out codes required by the host system.
To allow time to receive a telephone company dial tone, Pause characters may be
programmed after a pool dial-out code. Pause characters may also be required
either by the host system or after entering an access code for a long-distance
carrier.
Telephone Differences
3
9
Direct-Line Consoles
3
9
System Speed Dial numbers can be programmed from the first Direct-Line
Console (DLC) connected to the first analog extension jack. In extension
programming, press the Feature button or pound sign (
#
), the 3-digit System
Speed Dial code, the outside telephone number, and the pound sign.
Queued Call Consoles
3
9
Personal Speed Dial and System Speed Dial cannot be used to dial numbers on a
QCC. Directory features can be used instead.
