Lucent Technologies MERLIN LEGEND Release 5.0 Feature Reference Download

Page: 592 / 869

MERLIN LEGEND Communications System Release 5.0
Feature Reference

555-650-110

Issue 1

June 1997

Features

Page 560

Station Message Detail Recording (SMDR)

In ISDN format, Release 2.0 and earlier systems, the values in this column have
the following meanings:

■

indicates an incoming or outgoing voice call on a non-PRI facility.

■

indicates an outgoing data call on a PRI facility.

■

indicates an incoming voice or data call on a PRI facility.

In ISDN format, Release 3.0 and later systems, the values in this column have the
following meanings:

■

indicates either an incoming voice call that without ANI/ICLID information

or an outgoing voice call.

■

indicates an outgoing data call on a PRI facility.

■

indicates either an incoming voice call with ANI/ICLID information, or a

data call on a PRI facility or a facility equipped to receive the Calling Party
Number.

In ISDN format, Release 4.0 and later systems, the values in this column have the
following meanings:

■

indicates an incoming voice call without ANI/ICLID information or an

outgoing voice call.

■

indicates an outgoing data call on a PRI, BRI, or T1 Switched 56 facility.

■

indicates an incoming voice or data call with ANI/ICLID information on a

PRI, BRI, or T1 Switched 56 facility or a facility equipped to receive the
Calling Party Number.

DATE (Column 2)

The date is shown in

mm/dd/yy

format with leading zeros.

In Release 4.1 and earlier systems, the reported date is as follows:

■

When an incoming call was answered

■

When an outgoing call was originated (the system detected end of dialing)

In Release 4.2 and later systems, the reported date is as follows:

■

When an incoming call was detected in the system for Auto Login or Auto
Logout calling groups (if the Talk Time option is enabled)

■

When any other incoming call was answered (regardless of the value in the
Talk Time option)

■

When an outgoing call was originated (the system detects end of dialing)

TIME (Column 3)

The time is shown in

hh:mm

24-hour (military) format.

In Release 4.1 and earlier systems, the reported time is as follows:

Summary of Contents for MERLIN LEGEND Release 5.0






































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MERLIN LEGEND Release 5.0

Reviews:

Related manuals for MERLIN LEGEND Release 5.0

Brands by name

Popular brands

Lucent Technologies MERLIN LEGEND Release 5.0, Feature Reference

Search results

Summary of Contents for MERLIN LEGEND Release 5.0

Reviews:

Related manuals for MERLIN LEGEND Release 5.0

Brands by name

Popular brands