Related links
–
“Updating firmware and device drivers” on page 21
–
“Removing the system-board assembly” on page 683
–
“Installing the system-board assembly” on page 684
•
W.3808000 [W.3808000] An IMM communication failure has occurred.
Explanation:
IMM Communication Failure
Severity
Warning
User Response
Complete the following steps:
1. Reset the IMM from the CMM.
2. Use the CMM to remove auxilliary power from the compute node. This will reboot the compute
node.
3. Check the IBM support site for an applicable service bulletin or firmware update that applies to
this error.
4.
Update the UEFI Firmware.
5.
Replace the system board.
Related links
–
“Updating firmware and device drivers” on page 21
–
“Removing the system-board assembly” on page 683
–
“Installing the system-board assembly” on page 684
•
W.3808002 [W.3808002] An error occurred while saving UEFI settings to the IMM.
Explanation:
Error Updating System Configuration to IMM
Severity
Warning
User Response
Complete the following steps:
1. Use the Setup Utility to verify and save the settings (which will recover the settings).
2. Reset the IMM from the CMM.
3. Use CMM to remove auxilliary power from the compute node. This will reboot the compute node.
4. Check the IBM support site for an applicable service bulletin or firmware update that applies to
this error.
5.
Update the IMM Firmware.
6. Remove and re-install CMOS battery for 30 seconds to clear CMOS contents.
7.
Replace the system board.
Related links
–
“Removing the CMOS battery” on page 650
–
“Installing the CMOS battery” on page 651
609
Summary of Contents for Flex System x220
