Lenovo Flex System x220, Installation And Service Manual

Page: 615 / 714

Severity
Warning
User Response
Complete the following steps:
1. Go to the Setup Utility (System Settings -> Settings -> Driver Health Status List) and find a
driver/controller reporting Configuration Required status.
2. Search for the driver menu from System Settings and change settings appropriately.
3. Save settings and restart system.
Related links
– “Using the Setup utility” on page 24
• W.305800A [W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
Explanation: DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller
Severity
Warning
User Response
Complete the following steps:
1. Reboot the system.
2. If problem persists, switch to backup UEFI or update the current UEFI image.
3. Replace the system board.
Related links
– “Updating firmware and device drivers” on page 21
– “Removing the system-board assembly” on page 683
– “Installing the system-board assembly” on page 684
• W.305800B [W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
Explanation: DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller
Severity
Warning
User Response
Complete the following steps:
1. No action required. The system will reboot at the end of POST.
2. If the problem persists, switch to the backup UEFI image or update the current UEFI image.
3. Replace the system board.
Related links
– “Updating firmware and device drivers” on page 21
– “Removing the system-board assembly” on page 683
– “Installing the system-board assembly” on page 684
Chapter 6
.
Troubleshooting
607