Automatically notify support
No
Alert Category
none
SNMP Trap ID
CIM Information
Prefix:
IMM
ID:
0027
User Response
Information only; no action is required.
•
4000001c-00000000 : Watchdog [arg1] Screen Capture Occurred.
An operating-system error has occurred, and the screen capture was successful.
May also be shown as 4000001c00000000 or 0x4000001c00000000
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - other
SNMP Trap ID
22
CIM Information
Prefix:
IMM
ID:
0028
User Response
If there was no operating-system error, complete the following steps until the problem is solved:
1. Reconfigure the watchdog timer to a higher value.
2. Make sure that the IMM Ethernet-over-USB interface is enabled.
3. Reinstall the RNDIS or cdc_ether device driver for the operating system.
4. Disable the watchdog.
If there was an operating-system error, check the integrity of the installed operating system.
•
4000001d-00000000 : Watchdog [arg1] Failed to Capture Screen.
An operating-system error has occurred, and the screen capture failed.
May also be shown as 4000001d00000000 or 0x4000001d00000000
Severity
241
Summary of Contents for Flex System x220
