manualshive.com logo in svg

Lenovo Flex System x220, Installation And Service Manual

The Lenovo Flex System x220 is a cutting-edge, high-performance product designed to meet all your computing needs. To ensure seamless installation and optimal service, we provide a comprehensive "Installation and Service Manual" that you can easily download for free from our website. Discover the limitless potential of the Flex System x220 today!

Share
Download
background image

000

000

000

000

000

0000000000

0000000000

0000000000

0000000000

0000000000

0000000000

0000000000

Heat sink 2

Heat sink key

Heat sink
filler

Socket cover

Step 1.

Remove the cover (see “Removing the compute node cover” on page 643).

Step 2.

If you are not installing a new microprocessor and a new heat sink, remove the thermal grease
from the heat sink and microprocessor; then, apply new thermal grease before installation (see
“Thermal grease” on page 682).

Step 3.

Remove the heat-sink filler, if one is present.

Step 4.

Open the microprocessor socket release levers and retainer.

Microprocessor
retainer

Release
lever

a.

Identify which release lever is labeled as the first release lever to open and open it.

b.

Open the second release lever on the microprocessor socket.

c.

Open the microprocessor retainer.

Step 5.

Install the microprocessor on the microprocessor socket:

a.

Touch the static-protective bag that contains the new microprocessor to any

unpainted

surface

on the Flex System chassis or any

unpainted

metal surface on any other grounded rack

component; then, carefully remove the microprocessor and installation tool from the package.

b.

Release the sides of the cover and remove the cover from the installation tool. The
microprocessor is preinstalled on the installation tool.

680

Flex System x220 Compute Node Installation and Service Guide

Summary of Contents for Flex System x220











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Flex System x220

IBM BladeCenter HS23 User Manual preview
BladeCenter HS23
Brand: IBM Pages: 30
IBM System x3950 X6 Product Manual preview
System x3950 X6
Brand: IBM Pages: 53
NEC NECCare Gold Express5800/320Fd Service Manual preview
NECCare Gold Express5800/320Fd
Brand: NEC Pages: 10
NEC SV8500 Setup Manual preview
SV8500
Brand: NEC Pages: 84
NEC NEC Express5800 Series Release Note preview
NEC Express5800 Series
Brand: NEC Pages: 6
IBM BladeCenter S Installation And User Manual preview
BladeCenter S
Brand: IBM Pages: 84
IBM 9008-22L Manual preview
9008-22L
Brand: IBM Pages: 110
Quatech WLNG-AN-DP500 Series Reference Manual preview
WLNG-AN-DP500 Series
Brand: Quatech Pages: 120
IBM System x3550 M3 Installation And User Manual preview
System x3550 M3
Brand: IBM Pages: 160
IBM System x3650 M4 Type 7915 Installation And User Manual preview
System x3650 M4 Type 7915
Brand: IBM Pages: 192
IBM x3750 M4 Installation And Service Manual preview
x3750 M4
Brand: IBM Pages: 694
IBM System x3755 M3 7164 Installation And User Manual preview
System x3755 M3 7164
Brand: IBM Pages: 126
HP StorageWorks E Series Getting Started preview
StorageWorks E Series
Brand: HP Pages: 8
HP StorageWorks 9000s NAS Quick Reference And Rack Installation Instructions preview
StorageWorks 9000s NAS
Brand: HP Pages: 7
HP StorageWorks NAS e7000 v2 Specifications preview
StorageWorks NAS e7000 v2
Brand: HP Pages: 2
HP StorageWorks NAS e7000 v2 Quick Start Manual preview
StorageWorks NAS e7000 v2
Brand: HP Pages: 70
HP StorageWorks 600 All-in-One Maintenance And Service Manual preview
StorageWorks 600 All-in-One
Brand: HP Pages: 58
HP StorageWorks All-in-One SB600c - Storage Blade User Manual preview
StorageWorks All-in-One SB600c - Storage Blade
Brand: HP Pages: 60

Brands by name

Popular brands

Load more brands