Lenovo Flex System x220 Installation And Service Manual Download Page 234

Page: 234 / 714

Table 9. Events that automatically notify Support (continued)

Event ID

Message String

Automatically
Notify Support

806f010c-2581ffff

Uncorrectable error detected for
[PhysicalMemoryElementName] on Subsystem
[MemoryElementName].

Yes

806f010d-0400ffff

The Drive Drive 0 has been disabled due to a detected
fault.

Yes

806f010d-0401ffff

The Drive Drive 1 has been disabled due to a detected
fault.

Yes

806f010d-0402ffff

The Drive Drive 2 has been disabled due to a detected
fault.

Yes

806f010d-0403ffff

The Drive Drive 3 has been disabled due to a detected
fault.

Yes

806f010d-0404ffff

The Drive Drive 4 has been disabled due to a detected
fault.

Yes

806f010d-0405ffff

The Drive Drive 5 has been disabled due to a detected
fault.

Yes

806f010d-0406ffff

The Drive Drive 6 has been disabled due to a detected
fault.

Yes

806f010d-0407ffff

The Drive Drive 7 has been disabled due to a detected
fault.

Yes

806f011b-0c01ffff

The connector LightPath has encountered a configuration
error.

Yes

806f0207-0301ffff

CPU 1 has Failed with FRB1/BIST condition.

Yes

806f0207-0302ffff

CPU 2 has Failed with FRB1/BIST condition.

Yes

806f0207-2584ffff

[ProcessorElementName] has Failed with FRB1/BIST
condition.

Yes

806f020d-0400ffff

Failure Predicted on drive Drive 0 for array
[ComputerSystemElementName].

Yes

806f020d-0401ffff

Failure Predicted on drive Drive 1 for array
[ComputerSystemElementName].

Yes

806f020d-0402ffff

Failure Predicted on drive Drive 2 for array
[ComputerSystemElementName].

Yes

806f020d-0403ffff

Failure Predicted on drive Drive 3 for array
[ComputerSystemElementName].

Yes

806f020d-0404ffff

Failure Predicted on drive Drive 4 for array
[ComputerSystemElementName].

Yes

806f020d-0405ffff

Failure Predicted on drive Drive 5 for array
[ComputerSystemElementName].

Yes

806f020d-0406ffff

Failure Predicted on drive Drive 6 for array
[ComputerSystemElementName].

Yes

806f020d-0407ffff

Failure Predicted on drive Drive 7 for array
[ComputerSystemElementName].

Yes

806f050c-2001ffff

Memory Logging Limit Reached for DIMM 1 on
Subsystem [MemoryElementName].

Yes

806f050c-2002ffff

Memory Logging Limit Reached for DIMM 2 on
Subsystem [MemoryElementName].

Yes

226

Flex System x220 Compute Node Installation and Service Guide

Summary of Contents for Flex System x220











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Flex System x220

Reviews:

Related manuals for Flex System x220

Brands by name

Popular brands

Lenovo Flex System x220, Installation And Service Manual

Search results

Summary of Contents for Flex System x220

Reviews:

Related manuals for Flex System x220

Brands by name

Popular brands