SNMP Trap ID
50
CIM Information
Prefix:
PLAT
ID:
0184
User Response
This is a UEFI detected event. To find the UEFI diagnostic code for this event, in the information
center, follow the instructions in "Finding the UEFI diagnostic code" under "UEFI diagnostic
codes." Then, in the information center, open the topic for the UEFI diagnostic code and follow the
instructions under "User response."
•
806f0013-1701ffff : A diagnostic interrupt has occurred on system [ComputerSystemElementName].
The user has pressed the NMI button, or the NMI button has malfunctioned.
May also be shown as 806f00131701ffff or 0x806f00131701ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix:
PLAT
ID:
0222
User Response
If the NMI button on the operator information panel has not been pressed, complete the following
steps:
1. Make sure that the NMI button is not pressed.
2. Replace the system board.
•
806f0021-22010900 : Fault in slot [PhysicalConnectorSystemElementName] on system
[ComputerSystemElementName].
This message is for the use case when an implementation has detected a Fault in a slot. No Op ROM
Space.
May also be shown as 806f002122010900 or 0x806f002122010900
Severity
Error
Serviceable
352
Flex System x220 Compute Node Installation and Service Guide
Summary of Contents for Flex System x220
