Konica Minolta Drypro 832, Service Manual

Page: 21 / 530

Chapter 1 Safety Precautions and Warnings
1-9
1.2.4 Servicing Precautions
1.2.5 Disposing of Parts
Do not insert a piece of wire or metal.
Do not insert foreign objects such as metal strip or wire through vent or gap in the main
unit. Failure to observe this could cause an electric shock.
Be sure to turn OFF when servicing.
If you pull out the circuit board in this machine or remove connectors and cables with the
power turned on, it can cause serious accident.
Make sure to turn OFF the main power supply before starting these operations.
Do not remove lithium batteries carelessly.
The product contains lithium batteries. If you bring a lithium battery near fire or immerse it
in water, it could cause an explosion.
When handling internal electronic components of the product, wear a
wristband.
When handling internal electronic components, wear an antistatic wristband.
If you touch an energized electronic component such as circuit board, it can cause
damage.
Unplug the unit or turn OFF the main power supply before cleaning.
Be sure to unplug the unit or turn OFF the main power supply before cleaning this
machine.
You could get your finger caught in sliding or rotating parts.
This DRYPRO 832 product (including lithium batteries), accessories,
optional accessories, consumables, and media are designated as
industrial waste.
When disposing of these, be sure to have them disposed of by authorized industrial
waste disposal firm in accordance with the applicable ordinances and regulations of the
local government.