Konica Minolta Drypro 832, Service Manual

Page: 276 / 530

Chapter 14 Setting and Adjustment
14-20
14.3.3 Sub Scan OFFSET Adjustment
If the Sub Scan OFFSET requires adjustment, adjust it in the “PRODUCT SETUP” window of the DRYPRO 832
Utility Tool.
1
Click the [PRODUCT SETUP] button under “SERVICE INFO.”.
The “PRODUCT SETUP” window appears.
2
Enter the serial number of this product in “SERIAL NO.”.
3
Change the settings in the “SIZE FINE TUNING (Vertical)” entry field.
4
Click the [SAVE] button.
5
Click the [BACK] button.
The “PRODUCT SETUP” window is closed. Then you will return to the Maintenance Menu window.
6
Perform “14.3.1 Checking Print Size (Page 14-17)” again, and check that the Sub Scan
OFFSET has been adjusted correctly.
This is the end of the process of adjusting the Sub Scan OFFSET.
Example Calculation method Corresponds to
Example
1
1mm short “1” / 400 ×100 ×100 = 25
Add “25” from the value in “SIZE FINE
TUNING (Vertical)” and enter the new value.
Example
2
3mm long “3” / 400 ×100 ×100 = 75
Subtract “75” from the value in “SIZE FINE
TUNING (Vertical)” and enter the new value.
Caution
If it has not been adjusted correctly, perform “14.3.3 Sub Scan OFFSET Adjustment (Page 14-
20)” .