JLG 740AJ, Service And Maintenance Manual

Page: 504 / 582

SECTION 6 - JLG CONTROL SYSTE M
6-44 3121160
TILT:
9*
* Certain market selections
will limit tilt options and
alter default setting.
Note: Any of the selections
above will light the tilt lamp
when a tilted condition
occurs and will sound the
platform alarm when the
machine is also above eleva-
tion.
1
2
3
4
5
6
7
8
9
5 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more
than 5 degrees and above elevation; also reduces drive speed to creep.
4 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 4 degrees
and above elevation; also reduces drive speed to creep.
3 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 3 degrees
and above elevation; also reduces drive speed to creep.
4 D CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 4
degrees and above elevation; also disallows tower lift up, tower telescope out, drive, main telescope out
and main lift up.
3 D CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 3
degrees and above elevation; also disallows tower lift up, tower telescope out, drive, main telescope out
and main lift up.
5 D CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 5
degrees and above elevation; also disallows tower lift up, tower telescope out, drive, main telescope out
and main lift up.
5 DEG + DRV CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 5
degrees and above elevation; also reduces drive speed to creep when drive reversal is allowed, drive is
disallowed otherwise.
4 DEG + DRV CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 4
degrees and above elevation; also reduces drive speed to creep when drive reversal is allowed, drive is
disallowed otherwise.
3 DEG + DRV CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 3
degrees and above elevation; also reduces drive speed to creep when drive reversal is allowed, drive is
disallowed otherwise.
1
JIB:
10*
* Only visible under certain
model selections. 0
1
NO: No jib installed.
YES: Jib installed which has up and down movements only.
0
4 WHEEL STEER:
11*
* Only visible under certain
model selections. 0
1
NO: No four-wheel steer installed.
YES: Four-wheel steer installed.
0
Table 6-5. Machine Configuration Programming Information
Configuration Digit Number Description
Default
Number