JLG 740AJ, Service And Maintenance Manual

Page: 513 / 582

SECTION 6 - JLG CONTROL SYSTE M
3121160 6-53
7 Tower Lift: 0=NO
1=YES Displays/adjusts tower lift
presence 0
1
No Tower Lift installed
Yes
1 0
8 Tower Tele: 0=NO
1=YES Displays/adjusts tower
telescope presence 0
1
No Tower Telescope installed
Yes
1 0
9 Jib: 0=NO
1=YES
2=SIDESWING Displays/adjusts jib pres-
ence 0
1
2
No Jib installed
Jib installed which has up and down
movements only
Jib installed which has up and down
movements and side to side move-
ments
1 0
10 4ws 0=NO
1=YES Displays/adjusts 4 wheel
steer presence 0
1
No 4 wheel steer installed
Yes
1 0
11 soft touch 0=NO
1=YES Displays presence of soft
touch system 0
1
No Soft Touch System installed
Yes
1 0
12 generator 0=NO
1=YES Displays presence of gener-
ator 0
1
No Generator installed
Yes
1 0
13 Head & Tail LIGHTS 0=NO
1=YES Displays presence of head
and tail lights 0
1
No Head and Tail Lights installed
Yes
1 0
14 BROKEN Cable switch 0=NO
1=YES Displays presence of broken
cable switch 0
1
No Broken Cable Switch installed
Yes
1 0
15 load SENSOR 0=NO
1=WARN ONLY
2=WARN & CUTOUT Displays presence/function
of load sensor 0
1
2
No Load Sensor installed
Functions in Creep, Overload Lamp
Lit, Platform Alarm Beeps Continu-
ously
All functions cutout, flash overload
light (500mS on, 500mS off), Plat-
form Alarm beeps (5 sec on, 55 sec off,
5 sec on)
1 0
16 angle SENSOR 0=NO
1=DIGITAL
2=ANALOG Displays presence/function
of angle sensor 0
1
2
No Angle Sensor installed
Limit switches are installed
An analog sensor is installed
1 0
Table 6-8. Machine Configuration Parameters
Configuration
Digit
Parameter
(Displayed on
Analyzer 1
st
Line)
Parameter Value
(Displayed on Analyzer
2nd Line) Description Range Definition Data
Increment
Default
Value