SECTION 1 - SPECIFICATIONS
3121160
1-5
1.4
LUBRICATION
Hydraulic Oil
NOTE:
Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stability
for mobile hydraulic system service. JLG Industries recom-
mends Mobilfluid 424 hydraulic oil, which has an SAE vis-
cosity index of 152.
NOTE:
When temperatures remain consistently below 20 degrees
F. (-7 degrees C.), JLG Industries recommends the use of
Mobil DTE10.
NOTE:
Aside from JLG recommendations, it is not advisable to mix
oils of different brands or types, as they may not contain
the same required additives or be of comparable viscosi-
ties.
Table 1-21. Hydraulic Oil
Hydraulic System
Operating
Temperature Range
S.A.E. Viscosity
Grade
+0° to + 180° F (-18° to +83° C)
10W
+0° to + 210° F (-18° to +99° C)
10W-20, 10W-30
+50° to + 210° F (+10° to +99° C)
20W-20
Table 1-22. Mobilfluid 424 Specs
SAE Grade
10W30
ISO Grade
55
Gravity, API
29.0
Density, Lb/Gal. 60°F
7.35
Pour Point, Max
-46
°
F (-43
°
C)
Flash Point, Min.
442
°
F (228
°
C)
Viscosity
Brookfield, cP at -18°C
2700
at 40° C
55 cSt
at 100° C
9.3 cSt
Viscosity Index
152
Table 1-23. Mobil DTE 10 Excel 32 Specs
ISO Viscosity Grade
32
Pour Point, °C Max.
-54
Flash Point, °C Min.
250
Viscosity
cSt @ 40° C
32.7
cSt @ 100° C
6.63
cSt @ 100° F
32.7
cSt @ 212° F
6.63
Viscosity Index
164
Density (Kg/l) @ 15°C
0.8468
Density (lb/in³) @ 60°F
0.0305
Table 1-24. Mobil EAL 224 H Specs
Type
Biodegradable Vegetable Oil
ISO Viscosity Grade
32/46
Specific Gravity
0.922
Pour Point °C(°F)
-32°(-25°)
Flash Point °C(°F)
220°(428°)
Rust Protection, ASTM D 665A & BB
Pass Color, ASTM D 1500 Max 2.0
Operating Temp -17°-162°C
(0-180°F) Must be Stored Above
14°C (32°F)
Viscosity
ASTM D445 cST 40°C
37
ASTM D445 cST 100°C
8.4
Viscosity Index, ASTM D 2270
213
Table 1-25. UCon Hydrolube HP-5046 Specs
pH
9.1
Specific Gravity, 20/20°F
1.082
Pour Point, °C(°F)
<-50(<58)
Appearance
Red Liquid
Viscosity
at 0°C (32°F)
340cST(1600SUS)
at 40°C (104°F)
46cST(215SUS)
at 65°C (150°F)
22cST(106SUS)
Viscosity Index
170
Summary of Contents for 740AJ
