JLG 740AJ, Service And Maintenance Manual

Page: 514 / 582

SECTION 6 - JLG CONTROL SYSTE M
6-54 3121160
17 length SENSOR 0=NO
1=DIGITAL
2=ANALOG Displays presence/function
of length sensor 0
1
2
No Length Sensor Installed
Limit switch installed
An analog sensor is installed
1 0
18 FUNCTION CUTOUT 0=NO
1=BOOM CUTOUT
2=DRIVE CUTOUT
3=DRIVE CUT E & T Displays presence/function
of drive cutout. 0
1
2
3
No Drive Cutout
Boom Function Cutout While Driving
Above Elevation. (CE)
Drive Cutout Above Elevation
Drive Cutout Above Elevation And
Tilted
1 0
19 ground alarm 0=NO
1=DRIVE
2=LIFT DOWN
3=BOOM & DRIVE Displays/adjusts ground
alarm presence/function 0
1
2
3
No Ground Alarm installed
Travel alarm – sounds when the drive
function is active. (Option)
Descent alarm – sounds when either
lift down is active. (Option)
Motion alarm – sounds when any
function is active. (Option)
1 0
20 PLATFORM ALARM 0=NO
1=FAULT CODE Displays/adjusts platform
alarm presence/functions 0
1
Sounds Continuously When Above
Elevation And Tilted Only.
Sounds Continuously When Above
Elevation And Tilted, And In Conjunc-
tion With Fault Code Flashes. (Option)
1 0
21 Tower Prox Switches 0=NO
1=YES Displays presence/function
of Tower Proximity switches
for the models specified. 0
1
No Tower Prox Switches Installed
Tower Prox Switches Installed
1 0
Table 6-8. Machine Configuration Parameters
Configuration
Digit
Parameter
(Displayed on
Analyzer 1
st
Line)
Parameter Value
(Displayed on Analyzer
2nd Line) Description Range Definition Data
Increment
Default
Value