JLG 740AJ, Service And Maintenance Manual

Page: 489 / 582

SECTION 6 - JLG CONTROL SYSTE M
3121160 6-29
GEN SET CUTOUT:
12*
* Only visible if Gen Set / Welder
Menu selection is not 0.
0
1
MOTION ENABLED: Motion enabled when generator is ON.
MOTION CUTOUT: Motion cutout in platform mode only.
0
H & T LIGHTS:
13 0
1
NO: No head and tail lights installed.
YES: Head and tail lights installed.
0
CABLE SWITCH:
14*
* Only visible under certain model
selections.
* Certain market and model selec-
tions will alter the default setting.
0
1
NO: No broken cable switch installed.
YES: Broken cable switch installed.
0
LOAD SYSTEM:
15*
* Only visible under certain model
selections.
* Certain market selections will limit
load system options or alter default
setting.
0
1
2
3
4
NO: No load sensor installed.
WARN ONLY: Functions in creep, overload lamp lit, platform alarm beeps (5 sec ON, 2 sec OFF).
CUTOUT PLATFORM: All functions cutout, overload lamp lit, platform alarm beeps (5 sec ON, 2 sec OFF).
CUTOUT ALL: All functions cutout, flash overload light (500mS on, 500mS off), platform alarm beeps (5
sec ON, 2 sec OFF).
SPECIAL 1: Functions in creep, overload lamp lit, disables main telescope out & main lift up, platform
alarm beeps (5 sec ON, 2 sec OFF).
0
LOAD SENSOR:
16*
* Only visible if Load Sensor Menu
selection is not 0.
* Market selections will limit certain
load sensor options.
0
1
1 ON ROTATOR: Use the on-board load sensor for all models except those which use the Leveling Platform
Module.
4 UNDER PLATFORM: Use the EIM for load sensing.
1
FUNCTION CUTOUT:
17*
* Only visible under certain market
selections.
* Certain market selections will limit
function cutout options or alter
default setting.
0
1
2
3
NO: No drive cutout.
BOOM CUTOUT: Boom function cutout while driving above elevation.
DRIVE CUTOUT: Drive cutout above elevation.
DRIVE CUT E&T: Drive cutout above elevation and tilted.
0
GROUND ALARM:
18*
* Certain market selections will alter
default setting.
0
1
2
3
NO: No ground alarm installed.
DRIVE: Travel alarm sounds when the drive function is active (Option).
DESCENT: Descent alarm sounds when lift down is active (Option).
MOTION: Motion alarm sounds when any function is active (Option).
0
DRIVE:
19*
* Only visible under certain model
selections.
0
1
2
4WD: Four wheel drive.
2WD: Two wheel drive.
2WD W/ 2-SPEED: Two wheel drive with 2-speed valve.
0
Table 6-2. Machine Configuration Programming Information Prior to Software Version P5.3
Configuration Digit Number Description Default Number