JLG 740AJ, Service And Maintenance Manual

Page: 533 / 582

SECTION 6 - JLG CONTROL SYSTE M
3121160 6-73
PM BATTERY … Displays battery voltage at platform module
TEMP ... Displays ground module temperature
ELEV. CUTOUT … Displays elevation cutout switch status
FUNC. CUTOUT … Displays function cutout switch status
CREEP… Displays creep switch status
TILT … Displays measured vehicle tilt
AUX POWER … Displays status of auxiliary power switch
HORN … Displays status of horn switch
R FILTER … Displays status of return filter switch
C FILTER … Displays status of charge pump filter
LOAD LENGTH … Displays length switch status
ANGLE … Displays angle switch status
LOAD … Displays load sensor value
NOTE: Not displayed if load = 0.
DATALOG
ON … Displays total controller on (EMS) time
ENGINE … Displays engine run time
DRIVE … Displays total controller drive operation time
LIFT … Displays total controller lift operation time
SWING … Displays total controller swing operation time
TELE … Displays total controller tele operation time
MAX.TEMP … Displays maximum measured heatsink temp.
MIN.TEMP … Displays minimum measured heatsink temp.
MAX.VOLTS … Displays maximum measured battery voltage
RENTAL … Displays total controller operation time
NOTE: can be reset
ERASE RENTAL Not available at password level 2
YES:ENTER, NO:ESC ENTER resets rental datalog time to zero
VERSIONS
GROUND … Displays ground module software version
PLATFORM … Displays platform module software version
ANALYSER … Displays Analyzer software version
Table 6-13. Diagnostic Menu Descriptions