Intel NIOS II Owner Reference Manual Download

Page: 145 / 233

6.3. Core Revisions

Core revisions introduce changes to an existing Nios II core. Core revisions most

commonly fix identified bugs, or add support for an architecture revision. Not every

Nios II core is revised with every release of the Nios II architecture.

6.3.1. Nios II/f Core

Table 78.

Nios II/f Core Revisions

Version

Release Date

Notes

14.0

January 2015

Initial release of the Nios IIf core.

6.3.2. Nios II/s Core

Table 79.

Nios II/s Core Revisions

Version

Release Date

Notes

14.0

January 2015

Initial release of the Nios II s core.

6.3.3. Nios II/e Core

Table 80.

Nios II/e Core Revisions

Version

Release Date

Notes

14.0

January 2015

Initial release of the Nios II e core.

6.4. JTAG Debug Module Revisions

JTAG debug module revisions augment the debug capabilities of the Nios II processor,

or fix bugs isolated within the JTAG debug module logic.

Table 81.

JTAG Debug Module Revisions

Version

Release Date

Notes

14.0

January 2015

Initial release of the JTAG debug module.

6.5. Nios II Processor Versions Revision History

Document

Version

Changes

2018.04.18

Implemented editorial enhancements.

2016.10.28

Maintenance release.

2015.04.02

Initial release

6. Nios II Processor Versions

NII-PRG | 2018.04.18

Nios II Processor Reference Guide

145

Summary of Contents for NIOS II










































































































































































































































Search results

Summary of Contents for NIOS II

Reviews:

Related manuals for NIOS II

Brands by name

Popular brands

Intel NIOS II, Owner Reference Manual

Search results

Summary of Contents for NIOS II

Reviews:

Related manuals for NIOS II

Brands by name

Popular brands