Intel NIOS II Owner Reference Manual Download

Page: 13 / 233

1.5. Intel FPGA IP Evaluation Mode

You can evaluate the Nios II processor without a license. With Intel FPGA's free Intel

FPGA IP Evaluation Mode feature, you can perform the following actions:

•

Simulate the behavior of a Nios II processor within your system.

•

Verify the functionality of your design, as well as evaluate its size and speed

quickly and easily.

•

Generate time-limited device programming files for designs that include Nios II

processors.

•

Program a device and verify your design in hardware.

You only need to purchase a license for the Nios II processor when you are completely

satisfied with its functionality and performance, and want to take your design to

production.

Related Information
AN 320: Using Intel FPGA IP Evaluation Mode

For more information about Intel FPGA IP Evaluation Mode.

1.6. Introduction Revision History

Document

Version

Changes

2018.04.18

• Implemented editorial enhancements.
• Changed the document part number to NII-PRG.
• Corrected incorrect callouts of ldio/stio to ldwio/ stwio throughout the document.

2016.10.28

Maintenance release.

2015.04.02

Initial release

1. Introduction

NII-PRG | 2018.04.18

Nios II Processor Reference Guide

Summary of Contents for NIOS II










































































































































































































































Search results

Summary of Contents for NIOS II

Reviews:

Related manuals for NIOS II

Brands by name

Popular brands

Intel NIOS II, Owner Reference Manual

Search results

Summary of Contents for NIOS II

Reviews:

Related manuals for NIOS II

Brands by name

Popular brands