IBM System x3650 M5 Installation And Service Manual Download Page 808

Page: 808 / 1010

816f070d-0413ffff

Rebuild completed for Array in system [ComputerSystemElementName]. (Drive 19)

Explanation:

This message is for the use case when an implementation has detected that an Array Rebuild has

Completed.

May also be shown as 816f070d0413ffff or 0x816f070d0413ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0179

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f070d-0414ffff

Rebuild completed for Array in system [ComputerSystemElementName]. (Drive 20)

Explanation:

This message is for the use case when an implementation has detected that an Array Rebuild has

Completed.

May also be shown as 816f070d0414ffff or 0x816f070d0414ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0179

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f070d-0415ffff

Rebuild completed for Array in system [ComputerSystemElementName]. (Drive 21)

Explanation:

This message is for the use case when an implementation has detected that an Array Rebuild has

Completed.

May also be shown as 816f070d0415ffff or 0x816f070d0415ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0179

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f070d-0413ffff • 816f070d-0415ffff

792

System x3650 M5 Type 5462: Installation and Service Guide

Summary of Contents for System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3650 M5

Reviews:

IBM System x3650 M5, Installation And Service Manual, Page: 808 / 1010

Search results

Summary of Contents for System x3650 M5

Reviews: