IBM System x3650 M5, Installation And Service Manual, Page: 697 / 1010

816f0028-2101ffff Sensor [SensorElementName] has returned to normal on management system
[ComputerSystemElementName]. (TPM Cmd Failures)
Explanation: This message is for the use case when an implementation has detected a Sensor returned from
degraded/unavailable/failure.
May also be shown as 816f00282101ffff or 0x816f00282101ffff
Severity: Info
Alert Category: Warning - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0399
SNMP Trap ID:
60
Automatically notify Support: No
User response: No action; information only.
816f0107-0301ffff An Over-Temperature Condition has been removed on [ProcessorElementName]. (CPU 1)
Explanation: This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
May also be shown as 816f01070301ffff or 0x816f01070301ffff
Severity: Info
Alert Category:
Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0107-0302ffff An Over-Temperature Condition has been removed on [ProcessorElementName]. (CPU 2)
Explanation: This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
May also be shown as 816f01070302ffff or 0x816f01070302ffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0028-2101ffff • 816f0107-0302ffff
Appendix A. Integrated management module II (IMM2) error messages
681