IBM System x3650 M5 Installation And Service Manual Download Page 526

Page: 526 / 1010

806f030d-0403ffff

Hot Spare enabled for [ComputerSystemElementName]. (Drive 3)

Explanation:

This message is for the use case when an implementation has detected a Hot Spare has been Enabled.

May also be shown as 806f030d0403ffff or 0x806f030d0403ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0170

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

806f030d-0404ffff

Hot Spare enabled for [ComputerSystemElementName]. (Drive 4)

Explanation:

This message is for the use case when an implementation has detected a Hot Spare has been Enabled.

May also be shown as 806f030d0404ffff or 0x806f030d0404ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0170

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

806f030d-0405ffff

Hot Spare enabled for [ComputerSystemElementName]. (Drive 5)

Explanation:

This message is for the use case when an implementation has detected a Hot Spare has been Enabled.

May also be shown as 806f030d0405ffff or 0x806f030d0405ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0170

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

806f030d-0403ffff • 806f030d-0405ffff

510

System x3650 M5 Type 5462: Installation and Service Guide

Summary of Contents for System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3650 M5

Reviews:

IBM System x3650 M5, Installation And Service Manual, Page: 526 / 1010

Search results

Summary of Contents for System x3650 M5

Reviews: