IBM System x3650 M5, Installation And Service Manual, Page: 68 / 1010

Select this choice to enter the POST event viewer to view the POST error
messages.
– System Event Log
Select this choice to view the system event log.
– Clear System Event Log
Select this choice to clear the system event log.
v
User Security
Select this choice to set, change, or clear passwords. See “Passwords” on page 53
for more information.
This choice is on the full and limited Setup utility menu.
–
Set Power-on Password
Select this choice to set or change a power-on password. See “Power-on
password” on page 53 for more information.
– Clear Power-on Password
Select this choice to clear a power-on password. See “Power-on password” on
page 53 for more information.
– Set Administrator Password
Select this choice to set or change an administrator password. An
administrator password is intended to be used by a system administrator; it
limits access to the full Setup utility menu. If an administrator password is
set, the full Setup utility menu is available only if you type the administrator
password at the password prompt. See “Administrator password” on page 55
for more information.
– Clear Administrator Password
Select this choice to clear an administrator password. See “Administrator
password” on page 55 for more information.
v
Save Settings
Select this choice to save the changes that you have made in the settings.
v
Restore Settings
Select this choice to cancel the changes that you have made in the settings and
restore the previous settings.
v
Load Default Settings
Select this choice to cancel the changes that you have made in the settings and
restore the factory settings.
v
Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the
changes that you have made in the settings, you are asked whether you want to
save the changes or exit without saving them.
52
System x3650 M5 Type 5462: Installation and Service Guide