IBM System x3650 M5, Installation And Service Manual, Page: 260 / 1010

a. Tilt the battery so that you can insert it into the socket on the side opposite
the battery clip.
b. Press the battery down into the socket until it clicks into place. Make sure
that the battery clip holds the battery securely.
c. If you removed a rubber cover from the battery holder, use your fingers to
install the battery cover on top of the battery connector.
7. Reinstall the riser-card assembly 2 (see “Replacing a riser-card assembly” on
page 181), if necessary.
8. Install the top cover (see “Replacing the top cover” on page 147).
9. Slide the server into the rack.
10.
Reconnect the external cables; then, reconnect the power cords and turn on
the peripheral devices and the server.
11. Start the Setup utility and reset the configuration.
v
Set the system date and time.
v
Set the power-on password.
Battery
Figure 191. System battery position
Figure 192. System battery installation
244
System x3650 M5 Type 5462: Installation and Service Guide