IBM System x3650 M5, Installation And Service Manual, Page: 261 / 1010

v
Reconfigure the server.
See “Using the Setup utility” on page 48 for details.
Removing the LCD system information display panel
Use this information to remove the LCD system information display panel.
About this task
Removing the LCD panel assembly on a 3.5-inch model
To remove the LCD panel assembly on a 3.5-inch model, complete the following
steps.
1. Read the safety information that begins on “Safety” on page vii and
“Installation guidelines” on page 283.
2. Turn off the server and peripheral devices and disconnect the power cords and
all external cables, if necessary.
3. Remove the top cover (see “Removing the top cover” on page 146).
4. Remove the fan cage assembly (See “Removing the fan cage assembly” on page
172).
5. Pull up the release latch slightly and slide the LCD panel assembly out of the
server.
6. Disconnect the cable from the back of the LCD system information display
panel.
Note: To disconnect the cable, press evenly on the connector release latch first;
then, pull the cable out.
7.
▌1▐
Pull the tab on the LCD retention bracket to the left to disengage the
retention bracket.
▌2▐
Rotate the retention bracket to remove it from the server.
LCD panel assembly Release latch
Figure 193. LCD panel assembly removal
Chapter 5. Removing and replacing components
245