IBM System x3650 M5, Installation And Service Manual, Page: 421 / 1010

8007020f-2582ffff Sensor [SensorElementName] has transitioned to critical from a less severe state. (I/O
Resources)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
May also be shown as 8007020f2582ffff or 0x8007020f2582ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID:
50
Automatically notify Support: No
User response: Complete the following step to solve PCI I/O resource errors:
1. Go to F1 Setup
2. System Settings
3. System Settings -> Device and I/O ports "PCI 64 bit Resource"
4. choose "enable"
80070214-2201ffff Sensor [SensorElementName] has transitioned to critical from a less severe state. (TPM Lock)
Explanation:
This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
May also be shown as 800702142201ffff or 0x800702142201ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Update the server firmware (see Recovering the server firmware).
2. If the problem persists, (trained technician only) replace the system board (see Removing the system board and
Installing the system board).
8007020f-2582ffff • 80070214-2201ffff
Appendix A. Integrated management module II (IMM2) error messages
405