IBM System x3650 M5 Installation And Service Manual Download Page 721

Page: 721 / 1010

816f0125-2c01ffff

[ManagedElementName] detected as present. (ML2 Card)

Explanation:

This message is for the use case when an implementation has detected a Managed Element is now

Present.

May also be shown as 816f01252c01ffff or 0x816f01252c01ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0390

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f0207-0301ffff

[ProcessorElementName] has Recovered from FRB1/BIST condition. (CPU 1)

Explanation:

This message is for the use case when an implementation has detected a Processor Recovered -

FRB1/BIST condition.

May also be shown as 816f02070301ffff or 0x816f02070301ffff

Severity:

Info

Alert Category:

Critical - CPU

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0045

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f0207-0302ffff

[ProcessorElementName] has Recovered from FRB1/BIST condition. (CPU 2)

Explanation:

This message is for the use case when an implementation has detected a Processor Recovered -

FRB1/BIST condition.

May also be shown as 816f02070302ffff or 0x816f02070302ffff

Severity:

Info

Alert Category:

Critical - CPU

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0045

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f0125-2c01ffff • 816f0207-0302ffff

Appendix A. Integrated management module II (IMM2) error messages

705

Summary of Contents for System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3650 M5

Reviews:

IBM System x3650 M5, Installation And Service Manual, Page: 721 / 1010

Search results

Summary of Contents for System x3650 M5

Reviews: