IBM System x3650 M5 Installation And Service Manual Download Page 754

Page: 754 / 1010

816f040c-2005ffff

[PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName]. (DIMM 5)

Explanation:

This message is for the use case when an implementation has detected that Memory has been Enabled.

May also be shown as 816f040c2005ffff or 0x816f040c2005ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0130

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f040c-2006ffff

[PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName]. (DIMM 6)

Explanation:

This message is for the use case when an implementation has detected that Memory has been Enabled.

May also be shown as 816f040c2006ffff or 0x816f040c2006ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0130

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f040c-2007ffff

[PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName]. (DIMM 7)

Explanation:

This message is for the use case when an implementation has detected that Memory has been Enabled.

May also be shown as 816f040c2007ffff or 0x816f040c2007ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0130

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f040c-2005ffff • 816f040c-2007ffff

738

System x3650 M5 Type 5462: Installation and Service Guide

Summary of Contents for System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3650 M5

Reviews:

IBM System x3650 M5, Installation And Service Manual, Page: 754 / 1010

Search results

Summary of Contents for System x3650 M5

Reviews: