IBM Netfinity 3000, User Handbook Manual

Page: 127 / 370

Working with adapters
5. Push down on the latch to lock the tab on the underside in the
opening (hole) in the chassis. This securely holds the latch in
the closed position.
Push
Here
Alignment
Mark
System Board
Tab
Hole
Note: You cannot see the connection with a full-sized adapter in
place. To make sure that the system board is fully
seated, lock the tab on the underside of the system-board
latch in the opening (hole) in the chassis.
6. Retighten the riser card mounting screw.
7. If you want to install or remove any other options, do so now.
Otherwise, go to “Completing the installation” on page 148.
Chapter 4. Installing options
93