IBM Netfinity 3000, User Handbook Manual, Page: 188 / 370

4. When you add a hard disk drive and you want to include it in
your startup sequence, use the Start Options selection of the
Configuration/Setup Utility program (see “Start Options” on
page 42).
5. When you install an ISA legacy adapter, you must allocate
system resources to support it (see “ISA Legacy Resources” on
page 55).
6. Make a record of all customized settings before you make any
changes.
7. For more information on handling resource conflicts, see
“Resolving configuration conflicts” on page 57.
Record the new configuration information in Chapter 7, “Server
records and specifications” on page 243.
You might need to install device drivers after you install or replace
options, or after you update the configuration settings. See the
instructions that come with the option to determine if device drivers
are required, and, if so, how to install them. In most situations, the
ServerGuide software automatically installs your device drivers
during the operating system installation process. Also, the video,
SCSI, and Ethernet device drivers are on the IBM ServerGuide CDs.
Refer to your ServerGuide documentation for instructions on
configuring hardware and installing a network operating system.
If you do not need to install any device drivers, or update or save
the system configuration, your server is ready to use.
Network operating system instructions
If you do not use the ServerGuide software to install your network
operating system (NOS), you must download system-specific NOS
installation instructions and download device drivers.
To obtain system-specific NOS installation instructions and the latest
device drivers, access the IBM Web site at
http://www.ibm.com/pc/support
154
Netfinity 3000 User's Handbook