IBM Netfinity 3000, User Handbook Manual, Page: 103 / 370

Before you begin
Before you begin
Ÿ
Become familiar with the safety and handling guidelines
specified under “Safety information” on page xxiii, “Electrical
safety” on page 70, and “Handling static-sensitive devices” on
page 71. These guidelines will help you work safely while
working with your server and options.
Ÿ
Make sure that you have an adequate number of properly
grounded electrical outlets for your server, monitor, and any
other options you intend to install.
Ÿ
Place your server in a location that is dry. Rain or spilled
liquids might damage your server.
Ÿ
Have a supply of 2 MB (1.44 MB formatted), 3.5-inch diskettes
available.
Ÿ
Back up all important data before you make changes to hard
disk drives.
Ÿ
Have a small, flat-blade screwdriver available.
Attention:
To allow for air circulation, be sure to maintain the following
minimum clearances around the server:
Ÿ
102 mm (4 in.) in the front
Ÿ
127 mm (5 in.) in the rear
Ÿ
51 mm (2 in.) on the left and right sides
Chapter 4. Installing options
69