IBM Netfinity 3000, User Handbook Manual, Page: 72 / 370

The Configuration/Setup Utility program
Notes:
1. If an administrator password is not set, the Configuration/Setup
Utility program starts once you complete the startup procedure.
2. If an administrator password is set, but a power-on password is
not set, you must enter the administrator password to access the
Configuration/Setup Utility program.
3. If you have set both an administrator and a power-on password,
you can enter either one. However, to change any settings in
the Configuration/Setup Utility program, you must enter the
administrator password. If you enter the power-on password,
you can view limited information in the Configuration/Setup
Utility program, but you cannot change any settings.
4. If a configuration error occurs, a prompt appears before the
operating system starts ( see “Resolving configuration conflicts”
on page 57).
38
Netfinity 3000 User's Handbook