IBM Netfinity 3000, User Handbook Manual

Page: 200 / 370

POST Messages
4. At the POST Startup Errors screen, select Continue if you want
to access the Configuration/Setup Utility program menu. Select
Exit Setup
if you want to exit from the Configuration/Setup
Utility program. (For more information on exiting from the
Configuration/Setup Utility program, go to the Attention:
section that follows step 5d.) To select an item, press the Up
Arrow (
↑
) or Down Arrow (
↓
) key to highlight the item; then,
press Enter.
5. If you selected Continue in step 4, the Configuration/Setup
Utility program menu appears on the screen. You will see a
pointer next to any menu items that indicate components that
are malfunctioning or that have been changed since the last time
you turned on your server. If you did not knowingly make a
change to a flagged component, that component is probably
malfunctioning. If you made a change, continue here. If you
did not make a change, go to the Attention: section that follows
step 5d.
To use the Configuration/Setup Utility program, do the
following:
a. Select the menu item that is flagged (or that you want to
view) by pressing the Up Arrow (
↑
) or Down Arrow (
↓
)
key; then, press Enter.
b. A new menu specific to the item that you selected appears.
Press the Left Arrow (
←
) or Right Arrow (
→
) key to toggle
between choices for a menu item. (Note that each menu
item has a Help screen. To view the Help screen, select the
menu item; then, press F1.)
c. When you have finished viewing and changing settings,
press Esc to return to the Configuration/Setup Utility
program menu.
d. Before you exit from the program, select Save Settings.
When you exit from the Configuration/Setup Utility
program menu (see step 5e on page 167), your operating
system will start automatically (unless there is an
unresolved problem with the startup device).
166
Netfinity 3000 User's Handbook