IBM Netfinity 3000, User Handbook Manual

Page: 284 / 370

Recording installed devices
The following table shows the defaults for system memory and extended memory in your server.
Record changes to existing memory and upgrades here.
Table 16. RAM default settings and changes
Option Default value New value Additional information
System Memory
Extended Memory
DIMM 0
Ø
32 MB
Ø
64 MB
Ø
128 MB
DIMM 1
Ø
32 MB
Ø
64 MB
Ø
128 MB
DIMM 2
Ø
32 MB
Ø
64 MB
Ø
128 MB
Total Memory
Record adapter-slot configuration information for your server in the following table.
Table 17. Adapter-slot configuration information
Slot Type IRQ DMA I/O port ROM/RAM address
Option description
and additional
information
1
ISA
2 ISA
3 ISA
1 PCI
2 PCI
3 PCI
AGP
1
AGP
Notes:
1. The dedicated Accelerated Graphics Port (AGP) slot is for AGP adapters only. For instructions on installing an AGP
adapter in this slot, see “Installing or removing AGP adapters” on page 86. For information on the available AGP
adapters, go to http://www.ibm.com/pc/compat/ on the World Wide Web.
2. You may install a video adapter in the dedicated AGP slot connector, in an ISA slot connector, or in a PCI slot
connector. However, the server system board does not support the AGP video connector and the integrated video
subsystem simultaneously.
3. For information about installing ISA and PCI adapters, see “Installing or removing ISA and PCI adapters” on page 82.
4. Before setting values, review “Resolving configuration conflicts” on page 57 and follow the instructions for avoiding
configuration conflicts.
250
Netfinity 3000 User's Handbook