IBM Netfinity 3000, User Handbook Manual

Page: 96 / 370

Using the SCSISelect Utility program
Using the SCSISelect Utility program
If a SCSI adapter comes with your server, the server also comes
with a menu-driven configuration utility program, called SCSISelect,
that allows you to view and change SCSI settings.
You can use the SCSISelect Utility program to:
Ÿ
View and change the default SCSI identification (IDs)
Ÿ
Verify and change configuration conflicts
Ÿ
Perform a low-level format on a SCSI hard disk.
Starting the SCSISelect Utility program
You can access this program when you start the server. The
SCSISelect prompt appears after the IBM Netfinity 3000 server logo
appears. Press Ctrl
+
A immediately after the SCSISelect prompt
appears:
<<<
Press
<
CTRL
><
A
>
for SCSISelect

Utility! >>>
Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to move the
highlight bar to the various menu choices. Press Esc to return to the
previous menu. Also, you can press the F5 key to switch between
color and monochrome modes (if your monitor permits). To change
the settings of the displayed items, such as Channel A or Channel B,
follow the directions on the screen. Then, press Enter.
SCSISelect Utility program choices
The following choices appear on the SCSISelect Utility program
menu:
Ÿ
Configure/View Host Adapter Settings
Ÿ
SCSI Disk Utilities
Configure/View Host Adapter Settings
To view or change the SCSI controller settings, select
Configure/View Host Adapter Settings
and follow the directions on
the screen.
62
Netfinity 3000 User's Handbook