IBM Netfinity 3000, User Handbook Manual

Page: 57 / 370

Using the stabilizing feet
The four feet attached to the bottom cover rotate 90 degrees to
provide additional stability for your server.
Before you place the server in an upright position, rotate the four
feet a quarter turn away from the server. Then, carefully position
the server on its feet.
When you need to access the inside of the server to install options,
you might find it easier to place the server on its side, so that the
system board is facing you. If you do so, rotate the feet in towards
the server, so that they do not detach due to the weight of the
server.
What to do next?
Ÿ
If you need to install internal drives, memory, or adapters, go to
Chapter 4, “Installing options” on page 67; then, go to “Cabling
the server” on page 24 to complete your installation.
Ÿ
If you have no additional options to install, go to “Cabling the
server” on page 24.
Chapter 2. Getting started
23